Your position : Home  -  Solution -  3C

Industry introduction

Mobile phone dual camera size detection

With the development of the mobile phone industry, more and more manufacturers adopt dual camera or even multi-camera solutions. The precise processing requires accurate size detection of the camera module to ensure the accuracy requirements of the shipping module. The traditional two-element detection method can only perform sampling inspection on products. Each time takes 3 to 5 minutes. It is difficult to perform high-speed and accurate inspection on large-volume products, and it is impossible to achieve full inspection and cannot meet the production needs of the factory.

工艺特点

二次元是为产品首件检测设计,考虑到客户每日出货量100k~200k,二次元的测量效率、移动速度和软件设置无法满足对随意放置的产品进行快速尺寸测量的要求。

产品优势

  • Mobile phone dual camera size detection

    高速度

    支持飞行点胶、飞拍模式

  • Mobile phone dual camera size detection

    高识别

    本体识别,保证精度

  • Mobile phone dual camera size detection

    高精度

    多重标定,补偿机械误差

  • Mobile phone dual camera size detection

    强适应

    工况适应能力强,光源要求低

解决方案

产线采用标准治具上下料,高精度检测机内置的运动轨迹控制,可自动生成矩阵式检测路径,对每个产品进行动态检测,检测效率可达0.8s/个。

技术参数

1. 生产工况精度<0.01mm, 实验室测量精度可达3μm
2. 模板匹配,自动定位
3. 行程450mm*450mm*200mm
4. 最高运动速度可达400mm/s,即走即测,效率高
5. 支持m*n检测矩阵复制,自动路径规划
6. 工程文件一键保存
7. 检测结果数据一键导出
8. 自动标定,操作简便
9. 针对人机协作特别进行了安全性设计
10.全图形化界面,易学习,操作简便
11.支持同轴光、环形光等多种光源方案(选配)
12.?可方便拓展为在线式检测(选配)

2222
0755-23605463
info@esightech.com.cn
2148932100